Extra Clear EVA Interlayer film(High flow) HJ-AT
HJ-AT high flow extra clear EVA interlayer for architectural laminated glass. High transparency, strong flow and good glass wet-out for demanding lamination structures. 0.38 mm and 0.76 mm available.
Key Highlights:
- High Transparency with Low Haze
- Higher Flow for Improved Lamination Penetration
- ≥99% UV Blocking (280–380 nm)
- Strong Glass Adhesion
- Excellent Weather and Moisture Resistance
- Available in 0.38 mm and 0.76 mm Thicknesses
Product Overview
HJ-AT high flow extra clear EVA interlayer for architectural laminated glass. High transparency, strong flow and good glass wet-out for demanding lamination structures. 0.38 mm and 0.76 mm available.
Visible Light Transmittance
>
0
%
UV Blocking
>
0
%
Haze
<
0
%
Cross-Link
>
0
%
Key Features
High Optical Clarity
Excellent transparency with low haze for clear, visually appealing laminated glass.
Controlled Low Flow
Reduces excessive edge overflow during lamination, improving processing control and finishing efficiency.
Strong Glass Adhesion
Provides reliable bonding between glass layers for improved structural integrity.
Excellent UV Protection
Blocks ≥99% of UV radiation within the specified wavelength range.
Reliable Mechanical Strength
Combines tensile strength and flexibility to support demanding laminated glass applications.
Moisture Resistance
Low water absorption helps maintain consistent performance under suitable service conditions.
Technical Specifications
| Item | Unit | HJ-HT (Super Clear EVA Film) | HJ-AT (Super Clear EVA Film – High Fluidity) |
| Standard Thickness | mm | 0.38 / 0.76 | 0.38 / 0.76 |
| Standard Width | mm | up to 2600 | up to 2600 |
| Length (Roll) | m | 100 (0.38 mm) / 50 (0.76 mm) | 100 (0.38 mm) / 50 (0.76 mm) |
| Visible Light Transmittance (VL) | % | > 90.4 | > 90.6 |
| Haze | % | < 0.25 | < 0.29 |
| UV Blocking Rate (280–380 nm) | % | ≥ 99 | ≥ 99 |
| Crosslinking Rate | % | > 85 | > 85 |
| Adhesion with Glass | N/cm | > 95 | > 77 |
| Tensile Strength | MPa | > 17 | > 20 |
| Elongation at Break | % | ≥ 750 | ≥ 800 |
| Water Absorption | % | ≤ 0.1 | ≤ 0.1 |
| Weather Resistance | — | Pass (100 °C boiling, 85 °C/85% RH) | Pass (100 °C boiling, 85 °C/85% RH) |
| UV Aging Test | ΔYI | < 1 | < 1 |
| Processing Performance | — | Standard flow | High Fluidity – faster flow, better penetration, reduced bubbles |
| Typical Applications | — | Curtain walls, guardrails, automotive glass, bullet-resistant glass | Curtain walls, guardrails, automotive glass, bullet-resistant glass (especially where high processing efficiency is required) |
Product Applications

Architectural Laminated Glass

Interior Glass Partitions

Decorative Laminated Glass

Glass Doors & Panels
Frequently Asked Questions
1. What is HJ-AT Extra Clear EVA Interlayer Film used for?
HJ-AT is a high-flow EVA interlayer designed for architectural laminated glass applications, including curtain walls, skylights, glass balustrades, and decorative glass. Its enhanced fluidity makes it particularly suitable for laminated structures requiring improved glass wet-out and material penetration.
2. What is the difference between HJ-AT and HJ-HT EVA Interlayer Film?
Both products belong to the Extra Clear EVA series. HJ-AT offers higher fluidity during lamination, making it suitable for applications requiring greater material movement and penetration. HJ-HT provides more controlled flow for applications where edge control and reduced material movement are preferred.
3. Can HJ-AT High-Flow EVA Film help reduce bubbles during lamination?
HJ-AT's higher fluidity can improve glass surface wet-out and penetration, which may help reduce certain lamination defects under suitable processing conditions. However, bubble formation can also result from moisture, contamination, insufficient vacuum, or incorrect heating. Proper processing control remains essential.
4. What thicknesses and roll sizes are available for HJ-AT EVA Film?
HJ-AT is available in standard thicknesses of 0.38 mm and 0.76 mm, with widths up to 2600 mm. Standard roll lengths are 100 m for 0.38 mm film and 50 m for 0.76 mm film. Other specifications can be discussed based on order requirements.
5. Is HJ-AT EVA Interlayer suitable for outdoor laminated glass?
Yes. HJ-AT is developed for architectural laminated glass applications, including suitable outdoor installations. It provides high UV blocking, low water absorption, and stable crosslinking performance. Final suitability should be verified according to the glass structure, installation conditions, and project requirements.